您好,欢迎来到三六零分类信息网!老站,搜索引擎当天收录,欢迎发信息
免费发信息
三六零分类信息网 > 盐城分类信息网,免费分类信息发布

四色全自动高速水墨印刷开槽机瓦楞纸箱生产设备

2020/3/18 3:08:08发布147次查看
  • 加工定制:是
  • 售后服务:一年
  • 型号:2500
  • 外形尺寸:9500*5500*1650
  • 规格:单色双色三色四色印刷机


河北新华包装机械有限公司产品配置
hebei xinhua packing machinery co.,ltd
production parameter
zj400—(2400)型中速全自动水墨印刷开槽机功能配置及参数标准
zj400-2400 type middle automatic ink printing and slotting parameter
一、      前缘送纸部:
i.front feeding paper part
1、            进纸前缘定位,变频调整进纸速度。
1, feed the leading edge positioning, frequency adjust the feed rate.
2、            可调整风量,增加薄纸板及曲翘纸板传送稳当性、准确性。
2. adjustable air flow, increase warped cardboard and thin cardboard secure transmission, accuracy
3、            左右侧挡板,导向机构,位移平稳、精确。
3. right and left side covers, a guide mechanism, the smooth displacement accuracy.
4、            离合、气动锁紧,安全可靠。
4. clutch, pneumatic locking, safe and reliable.
5、            上送纸辊为无缝钢管,包裹耐磨橡胶,并做平衡校正。
5.the feed roller is seamless wear rubber wrapped and do balance correction.
6、            下送纸辊为无缝钢管,压花镀硬铬,平衡校正。
6.lower feed roller is seamless embossed hard chrome plating, balance correction.
7、            送纸辊间隙刻度盘蜗轮蜗杆调整,调整范围0-12mm,采用十字滑块机构,调整时传动齿轮永远保证正确啮合状态。
7.feed roll gap adjustment dial worm adjustment range 0-12mm, the use of cross-slider mechanism, when adjusted to ensure the correct transmission gear is always engaged state.
8、电脑调整装置
8.computer adjustment device
1)、送纸部电脑触摸屏式人机界面调整。
1).feed computer touch-screen human-machine interface adjustments.
二、印刷部
ii.printing part
1、印刷辊
1.printing roller
1)、钢板材质,表面研磨,镀硬铬。steel material, surface grinding, hard chrome plating.
2)、平衡校正,运转平稳。balance correction, smooth operation.
3)、采用荆刺式挂版,方便快捷,减少印刷试印和废品率type using thorns hanging version, convenient, reduce printing test print and scrap
2、印刷压辊printing press roller
1)、钢管表面研磨,镀硬铬。steel surface grinding, hard chrome plating.
2)、平衡校正,运转平稳。balance correction, smooth operation.
3)、印刷压辊与印刷辊间辊刻度盘显示,手动调整,调整范围0-12mm,采用摇板机构,调整时传动齿轮永远保证正确啮齿状态。between the printing press roller and the printing roll dialdisplay, manual adjustment, the adjustment range 0-12mm, using rocker panels institutions, adjust the transmission gear is always to ensure the correct rodents state.
1)、钢管表面采用先进的电镀硬铬工艺、坚硬、平滑、耐磨。steel surface using advanced hard chrome plating process, hard, smooth, wear-resistant.
3)、配合送纸气动升降网辊,防止印版重复着墨以及短时停机时,网辊穴中油墨干涸。when feeder with pneumatic lift net roller to prevent duplication inked plate and short downtime, network roll holein the ink dry.
4、橡胶辊(选用80%天然橡胶经高温精制而成,产地冀州)rubber roller (optional 80% natural rubber hightemperature refining, origin dongguang)
1)、无缝钢管表面包裹耐磨橡胶,经平衡校正。seamless steel surface wear rubber wrapped by balance correction.
2)、橡胶辊中高特殊研磨,传墨效果好。high special rubber roller grinding, good ink transfer effect.
3)、胶辊设有过载装置,可大大延长胶辊的使用寿命。cots with overload device, can significantly extend the life of rubber roller.
5、送纸上、下辊upper and lower feeding paper roller
1)、上辊:配有左右可调送纸轮。upper roller:with left and right adjustable feed roller
2)、下辊:无缝钢管,表面研磨,镀硬铬。lower  roller :seamless, surface grinding, hard chrome plating.
3)、上下送纸辊间隙刻度盘显示,蜗轮蜗杆调整,调整范围0-12mm,采用摇板连接,调整时传动齿轮永远保证正确中心距齿合。gap between the upper and lower feed rollers dial display, worm adjustment, the adjustment range 0-12mm, usingthe rocker panels connected, always adjusting the transmission gear teeth together to ensure the correct center distance.
5)网纹辊 anilox roller
  1)采用厚壁无缝钢管,经平衡校正,表面研磨,精压
   标识目数为,1组200  ,2组220,3组240,4组240
thick-walled seamless steel pipe, through balance correction, surface grinding, coining
     identifies the mesh is, a group of 200, two groups 220,3 240,4 group 240 group
6、相位调整机构phase adjustment
1)、差动行星式齿轮机构
2)、印刷相位采用微控及电动数字式360°调整(机器运转、停止均可调整)
3)、横向位置,手轮调整。
7、油墨循环
1)、采用气动隔膜泵上墨,供墨稳定,操作保养简单。
2)、油墨滤网,过滤杂质。
3)、设有自动匀墨装置,可实现停机不停墨功能,防止停机时油墨干结。
4)、储墨杯以防油墨飞溅和排气。
5)、自动循环清洗和自动上墨。
1), the differential planetary gear mechanism
2), the printing phase micro controller and electric digital 360° adjustment (the machine is running, stop can be adjusted)
3), the lateral position of the hand wheel adjustment.
7, ink circulation
1), the use of pneumatic diaphragm pumps ink, ink stability, operation and maintenance simple.
2), the ink filter, filter impurities.
3), with automatic inking unit, the ink can be realized down stop function to prevent the shutdown of the ink dry.
4), the ink reservoir cup to prevent ink splashes and exhaust.
5), the automatic cleaning cycle and automatic ink.
1、手动调整开槽四刀座横移,移动快捷方便。
2、同步手动调整开槽前刀与后刀尺寸(箱高)。
3、同步手动横移,上开槽刀,下开槽刀,剃纸刀和上下压线轮。
4、合金钢材质经热处理研磨齿形开槽刀,宽度为5-7毫米。
5、合金钢材质经热处理研磨修边刀,刀口锋利,精密度高。
iii.the slot portion
1, manually adjust the slotted four knife sliding, moving quickly and easily.
2, synchronized manually adjust the knife and the knife before slotting size (box height).
3, the synchronization manually traverse, the slotted knife, under the slotted knife, paper knife and shave down pressure line round.
4, tooth grinding heat treated alloy steel slotted knife, a width of 5-7 mm.
5, heat treated alloy steel grinding trimming knife, sharp knife, high precision.
四、圆模部(可选)
、可选用手动或式操作。
2、床台升降由强力链条带动。
3、堆叠高度为1600mm。
4、平面皱纹爬坡皮带,防止纸板下滑。
5、气压动作接纸挡板,在纸板堆积到预订高度时接纸托板可伸出,托住纸板。
iiv. stacking unit (optional)
1, the choice of manual or operation.
2 bed units lift driven by strong chain.
3, the stack height is 1600mm.
4, flat wrinkles climbing belt, to prevent the cardboard decline.
5, when the pressure action bin baffle stacked in cardboard tray connected to the book highly extendable, hold the cardboard.
六、传送齿轮
1)、运转顺畅、噪音小、硬度hrc50-55,寿命长,磨损小,可以长期保证印刷套色精度不变。
2)、相位齿轮采用45号钢,经调质、高频淬火、滚齿精加工,硬度hrc50-55.six gear transmission
1), smooth operation, low noise, hardness hrc50-55, long life, wear a small, long-term guarantee the accuracy of printed chromatic unchanged.
2), the phase gear using 45 steel, quenched and tempered, high-frequency hardening, hobbing finishing, hardness hrc50-55.
七、润滑
1)、各单元采用齿轮油泵上油,实现循环喷淋式润滑。
2)、各油箱装有储油
八、主要技术参数
1、机器**机械速度:100(张/分钟),工作速度80(张/分钟)
2、**进纸尺寸:1200mm×2200mm
3、最小进纸尺寸:350mm(满版)×800mm
4、**印刷面积:1450mm×2200mm
5、标准印版厚度:4mm或6mm
6、印刷精度:≤±0.75mm(四色)
7, lubrication
1), each unit with gear pump oil to achieve circular spray lubrication.
2), with the storage tank
eight, the main technical parameters
1, the machine maximum mechanical speed: 100 (pcs / min)
2, the maximum feed size: 1400mm× 2500mm
3, the minimum feed size: 350mm (full version)× 800mm
4, the maximum printing area: 1450mm× 2250mm
5, the standard plate thickness: 4mm or 6mm
6, the printing precision:≤ ± 0.75mm (four-color)

东光县新华包装机械有限公司
王忠荣
13730580168
河北东光县住沃工业区
盐城分类信息网,免费分类信息发布

VIP推荐

免费发布信息,免费发布B2B信息网站平台 - 三六零分类信息网 沪ICP备09012988号-2
企业名录